Type 1 Features
· This Multi Intercom System is a wireless
intercom system for multi-tenants in a residential complex or resort.
- · 20-80 Separate Users
- · Long Range
- · Easy Installation
- · Portable Handsets
- · Low Cost System
- · No Call Charges
- · Hands-free use for visitor
- · Multiple handsets per user
- · Rainproof and UV resistant
- · Gate Triggering
- · Low risk of lightning damage
- · Rechargeable Battery Back-up
- · Weight: 2 Kg
- · PC programming kit
·
Dimension: 14 cm (w) x
15cm (h) x 2.5 cm (d)
· Usage areas: Apartment
blocks, Townhouse complexes, Cluster homes, Housing estates, Large properties,
Office parks, Schools, Retirement villages, Long driveways, etc
·
Range 250m for light
and open areas and 100m in heavily built-up areas
· Content: Gate Station,
Power Supply, Antenna with cable,
Special Tool, User & installer Manual, Relay board
·
Radio Handsets (100 metre range
in built-up areas)
· External Antenna: Range is
terrain dependant and is 100m in
built-up areas and 350m in more open
areas. Range will be reduced with trees, walls and structures in between the
gate and house (refer to drawing under the "Downloads" section)
·
The external antenna is mounted as high as
possible for improved coverage and audio Includes "L" bracket with antenna,
5m cable and connectors and extra 3m cable extension
· If there are many walls, trees and buildings
between gate and houses, the handset antenna enhances reception.
How
to use
Communication is initiated from the
gate station by selecting a 3 digit code such as 001 or 901 and pressing the #
button. Only the selected houses handset will ring and communication is
established. Communication is simplex so only one person can speak at a time
but the gatestation’s microphone is always active so the visitor does not have
to press any key to speak. The inside handset can enter into the conversation
at any time by pressing a PTT button.
Multiple handsets can be added for the
same house to have internal communication. There is a handset calling button
which works on push-to-talk.
An extra gate station (back gate
station) can be added for instance on the inside to notify houses when the
visitor is leaving or on additional gates. All the same handsets can be called.
Gate opening is only possible from a back gate if a call is in progress.
Programming is done manually or via
PC. Programming mode is protected by a pin. Names and numbers are entered with
the keypad. The PC programming kit is needed for large systems or when a back
gate station is used.
Type 2 Features
·
Frequency Range: 136-174mHz
/245-246/350-390/400-470/465-520MHz(optional)
·
Channel Capacity:
5 - 100 channels ( depending of availability at the time of order from
manufacturer)
·
Channel Spacing:
5kHz/6.25kHz/10kHz/ 12.5kHz/ 20kHz/25kHz/30kHz/50kHz
·
Frequency
Stability: ±2.5ppm
·
Operating
Temperature: -25~+60°C
·
Antenna Impedance:
50Ω
·
Operating
Voltage: 7.2V
·
Dimensions: (W×H×D)
115x 56x 30mm
·
Weight: 220g(Include battery & antenna)
·
Battery: 1100/1300mAh
(Li-ion Battery)
|
Transmitter
|
|
|
RF output power
|
4W/5W
|
|
Modulation Type
|
16kΦF3E
|
|
Modulation Limiting
|
≤5kHz
|
|
Modulation Character
|
+3dB / -3dB
|
|
Spurious Radiation
|
0.75μW
|
|
Adjacent Ch. power
|
≥65dB
|
|
Max Fr. Deviation
|
≤5kHz
|
|
Occupied Bandwidth
|
≤16KHz
|
|
Receiver
|
|
|
Receiving Sensitivity
|
0.25μV
|
|
Adjacent Ch. Selectivity
|
60dB
|
|
Inter-modulation
|
60dB
|
|
Co-channel suppression
|
-8dB
|
|
Audio Response
|
+2dB -10dB
|
|
Audio Output
|
500mW
|
|
Audio Distortion
|
≤3%
|
How
to use : Every household is handed the required number of handheld Radio
handset to communication with the programmable number of channels available.
This also includes the gatehouses.
